From e617996326f36fd0325f7caeea6e04d6fff61ca8 Mon Sep 17 00:00:00 2001
From: Buddy Sandidge <buddysandidge@gmail.com>
Date: Sat, 18 May 2013 15:48:09 -0700
Subject: [PATCH] Add nave 0.4.3

---
 bin/nave | 678 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 678 insertions(+)
 create mode 100755 bin/nave

diff --git a/bin/nave b/bin/nave
new file mode 100755
index 0000000..a5c114a
--- /dev/null
+++ b/bin/nave
@@ -0,0 +1,678 @@
+#!/bin/bash
+
+# This program contains parts of narwhal's "sea" program,
+# as well as bits borrowed from Tim Caswell's "nvm"
+
+# nave install <version>
+# Fetch the version of node and install it in nave's folder.
+
+# nave use <version>
+# Install the <version> if it isn't already, and then start
+# a subshell with that version's folder at the start of the
+# $PATH
+
+# nave use <version> program.js
+# Like "nave use", but have the subshell start the program.js
+# immediately.
+
+# When told to use a version:
+# Ensure that the version exists, install it, and
+# then add its prefix to the PATH, and start a subshell.
+
+if [ "$NAVE_DEBUG" != "" ]; then
+  set -x
+fi
+
+if [ -z "$BASH" ]; then
+  cat >&2 <<MSG
+Nave is a bash program, and must be run with bash.
+MSG
+  exit 1
+fi
+
+shell=`basename "$SHELL"`
+case "$shell" in
+  bash) ;;
+  zsh) ;;
+  *)
+    echo "Nave only supports zsh and bash shells." >&2
+    exit 1
+    ;;
+esac
+
+# Use fancy pants globs
+shopt -s extglob
+
+# Try to figure out the os and arch for binary fetching
+uname="$(uname -a)"
+os=
+arch=x86
+case "$uname" in
+  Linux\ *) os=linux ;;
+  Darwin\ *) os=darwin ;;
+  SunOS\ *) os=sunos ;;
+esac
+case "$uname" in
+  *x86_64*) arch=x64 ;;
+esac
+
+tar=${TAR-tar}
+
+main () {
+  local SELF_PATH DIR SYM
+  # get the absolute path of the executable
+  SELF_PATH="$0"
+  if [ "${SELF_PATH:0:1}" != "." ] && [ "${SELF_PATH:0:1}" != "/" ]; then
+    SELF_PATH=./"$SELF_PATH"
+  fi
+  SELF_PATH=$( cd -P -- "$(dirname -- "$SELF_PATH")" \
+            && pwd -P \
+            ) && SELF_PATH=$SELF_PATH/$(basename -- "$0")
+
+  # resolve symlinks
+  while [ -h "$SELF_PATH" ]; do
+    DIR=$(dirname -- "$SELF_PATH")
+    SYM=$(readlink -- "$SELF_PATH")
+    SELF_PATH=$( cd -- "$DIR" \
+              && cd -- $(dirname -- "$SYM") \
+              && pwd \
+              )/$(basename -- "$SYM")
+  done
+
+  if ! [ -d "$NAVE_DIR" ]; then
+    if [ -d "$HOME" ]; then
+      NAVE_DIR="$HOME"/.nave
+    else
+      NAVE_DIR=/usr/local/lib/nave
+    fi
+  fi
+  if ! [ -d "$NAVE_DIR" ] && ! mkdir -p -- "$NAVE_DIR"; then
+    NAVE_DIR="$(dirname -- "$SELF_PATH")"
+  fi
+
+  # set up the naverc init file.
+  # For zsh compatibility, we name this file ".zshenv" instead of
+  # the more reasonable "naverc" name.
+  # Important! Update this number any time the init content is changed.
+  local rcversion="#3"
+  local rcfile="$NAVE_DIR/.zshenv"
+  if ! [ -f "$rcfile" ] \
+      || [ "$(head -n1 "$rcfile")" != "$rcversion" ]; then
+
+    cat > "$rcfile" <<RC
+$rcversion
+[ "\$NAVE_DEBUG" != "" ] && set -x || true
+if [ "\$BASH" != "" ]; then
+  if [ "\$NAVE_LOGIN" != "" ]; then
+    [ -f ~/.bash_profile ] && . ~/.bash_profile || true
+    [ -f ~/.bash_login ] && .  ~/.bash_login || true
+    [ -f ~/.profile ] && . ~/.profile || true
+  else
+    [ -f ~/.bashrc ] && . ~/.bashrc || true
+  fi
+else
+  [ -f ~/.zshenv ] && . ~/.zshenv || true
+  export DISABLE_AUTO_UPDATE=true
+  if [ "\$NAVE_LOGIN" != "" ]; then
+    [ -f ~/.zprofile ] && . ~/.zprofile || true
+    [ -f ~/.zshrc ] && . ~/.zshrc || true
+    [ -f ~/.zlogin ] && . ~/.zlogin || true
+  else
+    [ -f ~/.zshrc ] && . ~/.zshrc || true
+  fi
+fi
+unset ZDOTDIR
+export PATH=\$NAVEPATH:\$PATH
+[ -f ~/.naverc ] && . ~/.naverc || true
+RC
+
+    cat > "$NAVE_DIR/.zlogout" <<RC
+[ -f ~/.zlogout ] && . ~/.zlogout || true
+RC
+
+  fi
+
+  # couldn't write file
+  if ! [ -f "$rcfile" ] || [ "$(head -n1 "$rcfile")" != "$rcversion" ]; then
+    fail "Nave dir $NAVE_DIR is not writable."
+  fi
+
+  export NAVE_DIR
+  export NAVE_SRC="$NAVE_DIR/src"
+  export NAVE_ROOT="$NAVE_DIR/installed"
+  ensure_dir "$NAVE_SRC"
+  ensure_dir "$NAVE_ROOT"
+
+  local cmd="$1"
+  shift
+  case $cmd in
+    ls-remote | ls-all)
+      cmd="nave_${cmd/-/_}"
+      ;;
+#    use)
+#      cmd="nave_named"
+#      ;;
+    install | fetch | use | clean | test | named | \
+    ls |  uninstall | usemain | latest | stable | has | installed )
+      cmd="nave_$cmd"
+      ;;
+    * )
+      cmd="nave_help"
+      ;;
+  esac
+  $cmd "$@"
+  local ret=$?
+  if [ $ret -eq 0 ]; then
+    exit 0
+  else
+    echo "failed with code=$ret" >&2
+    exit $ret
+  fi
+}
+
+function enquote_all () {
+  local ARG ARGS
+  ARGS=""
+  for ARG in "$@"; do
+    [ -n "$ARGS" ] && ARGS="$ARGS "
+    ARGS="$ARGS'""$( echo " $ARG" \
+                   | cut -c 2- \
+                   | sed 's/'"'"'/'"'"'"'"'"'"'"'"'/g' \
+                   )""'"
+  done
+  echo "$ARGS"
+}
+
+ensure_dir () {
+  if ! [ -d "$1" ]; then
+    mkdir -p -- "$1" || fail "couldn't create $1"
+  fi
+}
+
+remove_dir () {
+  if [ -d "$1" ]; then
+    rm -rf -- "$1" || fail "Could not remove $1"
+  fi
+}
+
+fail () {
+  echo "$@" >&2
+  exit 1
+}
+
+nave_fetch () {
+  local version=$(ver "$1")
+  if nave_has "$version"; then
+    echo "already fetched $version" >&2
+    return 0
+  fi
+
+  local src="$NAVE_SRC/$version"
+  remove_dir "$src"
+  ensure_dir "$src"
+
+  local url
+  local urls=(
+    "http://nodejs.org/dist/v$version/node-v$version.tar.gz"
+    "http://nodejs.org/dist/node-v$version.tar.gz"
+    "http://nodejs.org/dist/node-$version.tar.gz"
+  )
+  for url in "${urls[@]}"; do
+    curl -#Lf "$url" > "$src".tgz
+    if [ $? -eq 0 ]; then
+      $tar xzf "$src".tgz -C "$src" --strip-components=1
+      if [ $? -eq 0 ]; then
+        echo "fetched from $url" >&2
+        return 0
+      fi
+    fi
+  done
+
+  rm "$src".tgz
+  remove_dir "$src"
+  echo "Couldn't fetch $version" >&2
+  return 1
+}
+
+build () {
+  local version="$1"
+
+  # shortcut - try the binary if possible.
+  if [ -n "$os" ]; then
+    local binavail
+    # binaries started with node 0.8.6
+    case "$version" in
+      0.8.[012345]) binavail=0 ;;
+      0.[1234567]) binavail=0 ;;
+      *) binavail=1 ;;
+    esac
+    if [ $binavail -eq 1 ]; then
+      local t="$version-$os-$arch"
+      local url="http://nodejs.org/dist/v$version/node-v${t}.tar.gz"
+      local tgz="$NAVE_SRC/$t.tgz"
+      curl -#Lf "$url" > "$tgz"
+      if [ $? -ne 0 ]; then
+        # binary download failed.  oh well.  cleanup, and proceed.
+        rm "$tgz"
+        echo "Binary download failed, trying source." >&2
+      else
+        # unpack straight into the build target.
+        $tar xzf "$tgz" -C "$2" --strip-components 1
+        if [ $? -ne 0 ]; then
+          rm "$tgz"
+          nave_uninstall "$version"
+          echo "Binary unpack failed, trying source." >&2
+        fi
+        # it worked!
+        echo "installed from binary" >&2
+        return 0
+      fi
+    fi
+  fi
+
+  nave_fetch "$version"
+  if [ $? != 0 ]; then
+    # fetch failed, don't continue and try to build it.
+    return 1
+  fi
+
+  local src="$NAVE_SRC/$version"
+  local jobs=$NAVE_JOBS
+  jobs=${jobs:-$JOBS}
+  jobs=${jobs:-$(sysctl -n hw.ncpu)}
+  jobs=${jobs:-2}
+
+  ( cd -- "$src"
+    [ -f ~/.naverc ] && . ~/.naverc || true
+    if [ "$NAVE_CONFIG" == "" ]; then
+      NAVE_CONFIG=()
+    fi
+    JOBS=$jobs ./configure "${NAVE_CONFIG[@]}" --prefix="$2" \
+      || fail "Failed to configure $version"
+    JOBS=$jobs make -j$jobs \
+      || fail "Failed to make $version"
+    make install || fail "Failed to install $version"
+  ) || fail "fail"
+  return $?
+}
+
+nave_usemain () {
+  if [ ${NAVELVL-0} -gt 0 ]; then
+    fail "Can't usemain inside a nave subshell. Exit to main shell."
+  fi
+  local version=$(ver "$1")
+  local current=$(node -v || true)
+  local wn=$(which node || true)
+  local prefix="/usr/local"
+  if [ "x$wn" != "x" ]; then
+    prefix="${wn/\/bin\/node/}"
+    if [ "x$prefix" == "x" ]; then
+      prefix="/usr/local"
+    fi
+  fi
+  current="${current/v/}"
+  if [ "$current" == "$version" ]; then
+    echo "$version already installed" >&2
+    return 0
+  fi
+
+  build "$version" "$prefix"
+}
+
+nave_install () {
+  local version=$(ver "$1")
+  if nave_installed "$version"; then
+    echo "Already installed: $version" >&2
+    return 0
+  fi
+  local install="$NAVE_ROOT/$version"
+  ensure_dir "$install"
+
+  build "$version" "$install"
+  local ret=$?
+  if [ $ret -ne 0 ]; then
+    remove_dir "$install"
+    return $ret
+  fi
+}
+
+nave_test () {
+  local version=$(ver "$1")
+  nave_fetch "$version"
+  local src="$NAVE_SRC/$version"
+  ( cd -- "$src"
+    [ -f ~/.naverc ] && . ~/.naverc || true
+    if [ "$NAVE_CONFIG" == "" ]; then
+      NAVE_CONFIG=()
+    fi
+    ./configure "${NAVE_CONFIG[@]}" || fail "failed to ./configure"
+    make test-all || fail "Failed tests"
+  ) || fail "failed"
+}
+
+nave_ls () {
+  ls -- $NAVE_SRC | version_list "src" \
+    && ls -- $NAVE_ROOT | version_list "installed" \
+    && nave_ls_named \
+    || return 1
+}
+
+nave_ls_remote () {
+  curl -s http://nodejs.org/dist/ \
+    | version_list "remote" \
+    || return 1
+}
+
+nave_ls_named () {
+  echo "named:"
+  ls -- "$NAVE_ROOT" \
+    | egrep -v '[0-9]+\.[0-9]+\.[0-9]+' \
+    | sort \
+    | while read name; do
+      echo "$name: $(ver $($NAVE_ROOT/$name/bin/node -v 2>/dev/null))"
+    done
+}
+
+nave_ls_all () {
+  nave_ls \
+    && (echo ""; nave_ls_remote) \
+    || return 1
+}
+
+ver () {
+  local version="$1"
+  local nonames="$2"
+  version="${version/v/}"
+  case $version in
+    latest | stable) nave_$version ;;
+    +([0-9])\.+([0-9])) nave_version_family "$version" ;;
+    +([0-9])\.+([0-9])\.+([0-9])) echo $version ;;
+    *) [ "$nonames" = "" ] && echo $version ;;
+  esac
+}
+
+nave_version_family () {
+  local family="$1"
+  family="${family/v/}"
+  curl -s http://nodejs.org/dist/ \
+    | egrep -o $family'\.[0-9]+' \
+    | sort -u -k 1,1n -k 2,2n -k 3,3n -t . \
+    | tail -n1
+}
+
+nave_latest () {
+  curl -s http://nodejs.org/dist/ \
+    | egrep -o '[0-9]+\.[0-9]+\.[0-9]+' \
+    | sort -u -k 1,1n -k 2,2n -k 3,3n -t . \
+    | tail -n1
+}
+
+nave_stable () {
+  curl -s http://nodejs.org/dist/ \
+    | egrep -o '[0-9]+\.[0-9]*[02468]\.[0-9]+' \
+    | sort -u -k 1,1n -k 2,2n -k 3,3n -t . \
+    | tail -n1
+}
+
+version_list_named () {
+  egrep -v '[0-9]+\.[0-9]+\.[0-9]+' \
+    | sort -u -k 1,1n -k 2,2n -k 3,3n -t . \
+    | organize_version_list \
+    || return 1
+}
+
+version_list () {
+  echo "$1:"
+  egrep -o '[0-9]+\.[0-9]+\.[0-9]+' \
+    | sort -u -k 1,1n -k 2,2n -k 3,3n -t . \
+    | organize_version_list \
+    || return 1
+}
+
+organize_version_list () {
+  local i=0
+  local v
+  while read v; do
+    if [ $i -eq 8 ]; then
+      i=0
+      echo "$v"
+    else
+      let 'i = i + 1'
+      echo -ne "$v\t"
+    fi
+  done
+  echo ""
+  [ $i -ne 0 ] && echo ""
+  return 0
+}
+
+nave_has () {
+  local version=$(ver "$1")
+  [ -x "$NAVE_SRC/$version/configure" ] || return 1
+}
+
+nave_installed () {
+  local version=$(ver "$1")
+  [ -x "$NAVE_ROOT/$version/bin/node" ] || return 1
+}
+
+nave_use () {
+  local version=$(ver "$1")
+
+  # if it's not a version number, then treat as a name.
+  case "$version" in
+    +([0-9])\.+([0-9])\.+([0-9])) ;;
+    *)
+      nave_named "$@"
+      return $?
+      ;;
+  esac
+
+  if [ -z "$version" ]; then
+    fail "Must supply a version"
+  fi
+
+  if [ "$version" == "$NAVENAME" ]; then
+    echo "already using $version" >&2
+    if [ $# -gt 1 ]; then
+      shift
+      "$@"
+    fi
+    return $?
+  fi
+
+  nave_install "$version" || fail "failed to install $version"
+  local prefix="$NAVE_ROOT/$version"
+  local lvl=$[ ${NAVELVL-0} + 1 ]
+  echo "using $version" >&2
+  if [ $# -gt 1 ]; then
+    shift
+    nave_exec "$lvl" "$version" "$version" "$prefix" "$@"
+    return $?
+  else
+    nave_login "$lvl" "$version" "$version" "$prefix"
+    return $?
+  fi
+}
+
+# internal
+nave_exec () {
+  nave_run "exec" "$@"
+  return $?
+}
+
+nave_login () {
+  nave_run "login" "$@"
+  return $?
+}
+
+nave_run () {
+  local exec="$1"
+  shift
+  local lvl="$1"
+  shift
+  local name="$1"
+  shift
+  local version="$1"
+  shift
+  local prefix="$1"
+  shift
+
+  local bin="$prefix/bin"
+  local lib="$prefix/lib/node"
+  local man="$prefix/share/man"
+  ensure_dir "$bin"
+  ensure_dir "$lib"
+  ensure_dir "$man"
+
+  # now $@ is the command to run, or empty if it's not an exec.
+  local exit_code
+  local args=()
+  local isLogin
+
+  if [ "$exec" == "exec" ]; then
+    isLogin=""
+    # source the nave env file, then run the command.
+    args=("-c" ". $(enquote_all $NAVE_DIR/.zshenv); $(enquote_all "$@")")
+  elif [ "$shell" == "zsh" ]; then
+    isLogin="1"
+    # no need to set rcfile, since ZDOTDIR is set.
+    args=()
+  else
+    isLogin="1"
+    # bash, use --rcfile argument
+    args=("--rcfile" "$NAVE_DIR/.zshenv")
+  fi
+
+  local nave="$version"
+  if [ "$version" != "$name" ]; then
+    nave="$name"-"$version"
+  fi
+
+  NAVELVL=$lvl \
+  NAVEPATH="$bin" \
+  NAVEVERSION="$version" \
+  NAVENAME="$name" \
+  NAVE="$nave" \
+  npm_config_binroot="$bin"\
+  npm_config_root="$lib" \
+  npm_config_manroot="$man" \
+  npm_config_prefix="$prefix" \
+  NODE_PATH="$lib" \
+  NAVE_LOGIN="$isLogin" \
+  NAVE_DIR="$NAVE_DIR" \
+  ZDOTDIR="$NAVE_DIR" \
+    "$SHELL" "${args[@]}"
+
+  exit_code=$?
+  hash -r
+  return $exit_code
+}
+
+nave_named () {
+  local name="$1"
+  shift
+
+  local version=$(ver "$1" NONAMES)
+  if [ "$version" != "" ]; then
+    shift
+  fi
+
+  add_named_env "$name" "$version" || fail "failed to create $name env"
+
+  if [ "$name" == "$NAVENAME" ] && [ "$version" == "$NAVEVERSION" ]; then
+    echo "already using $name" >&2
+    if [ $# -gt 0 ]; then
+      "$@"
+    fi
+    return $?
+  fi
+
+  if [ "$version" = "" ]; then
+    version="$(ver "$("$NAVE_ROOT/$name/bin/node" -v 2>/dev/null)")"
+  fi
+
+  local prefix="$NAVE_ROOT/$name"
+
+  local lvl=$[ ${NAVELVL-0} + 1 ]
+  # get the version
+  if [ $# -gt 0 ]; then
+    nave_exec "$lvl" "$name" "$version" "$prefix" "$@"
+    return $?
+  else
+    nave_login "$lvl" "$name" "$version" "$prefix"
+    return $?
+  fi
+}
+
+add_named_env () {
+  local name="$1"
+  local version="$2"
+  local cur="$(ver "$($NAVE_ROOT/$name/bin/node -v 2>/dev/null)" "NONAMES")"
+
+  if [ "$version" != "" ]; then
+    version="$(ver "$version" "NONAMES")"
+  else
+    version="$cur"
+  fi
+
+  if [ "$version" = "" ]; then
+    echo "What version of node?"
+    read -p "stable, latest, x.y, or x.y.z > " version
+    version=$(ver "$version")
+  fi
+
+  # if that version is already there, then nothing to do.
+  if [ "$cur" = "$version" ]; then
+    return 0
+  fi
+
+  echo "Creating new env named '$name' using node $version" >&2
+
+  nave_install "$version" || fail "failed to install $version"
+  ensure_dir "$NAVE_ROOT/$name/bin"
+  ensure_dir "$NAVE_ROOT/$name/lib/node"
+  ensure_dir "$NAVE_ROOT/$name/lib/node_modules"
+  ensure_dir "$NAVE_ROOT/$name/share/man"
+
+  ln -sf -- "$NAVE_ROOT/$version/bin/node" "$NAVE_ROOT/$name/bin/node"
+  ln -sf -- "$NAVE_ROOT/$version/bin/node-waf" "$NAVE_ROOT/$name/bin/node-waf"
+}
+
+nave_clean () {
+  rm -rf "$NAVE_SRC/$(ver "$1")" "$NAVE_SRC/$(ver "$1")".tgz "$NAVE_SRC/$(ver "$1")"-*.tgz
+}
+
+nave_uninstall () {
+  remove_dir "$NAVE_ROOT/$(ver "$1")"
+}
+
+nave_help () {
+  cat <<EOF
+
+Usage: nave <cmd>
+
+Commands:
+
+install <version>    Install the version passed (ex: 0.1.103)
+use <version>        Enter a subshell where <version> is being used
+use <ver> <program>  Enter a subshell, and run "<program>", then exit
+use <name> <ver>     Create a named env, using the specified version.
+                     If the name already exists, but the version differs,
+                     then it will update the link.
+usemain <version>    Install in /usr/local/bin (ie, use as your main nodejs)
+clean <version>      Delete the source code for <version>
+uninstall <version>  Delete the install for <version>
+ls                   List versions currently installed
+ls-remote            List remote node versions
+ls-all               List remote and local node versions
+latest               Show the most recent dist version
+help                 Output help information
+
+<version> can be the string "latest" to get the latest distribution.
+<version> can be the string "stable" to get the latest stable version.
+
+EOF
+}
+
+main "$@"